SixHex Ordering Information

This selection shows all the CM-ATR/25/35/45/SIXHEX standard configurations and options.

Select from the follow information below to compile your individual CM Chassis Part Number.

P/N: CM-ATR-S5/SIXHEX/B/I/W/D1/D2/R/T/S/FP/TC/BC/F/G/C

Auxiliary DC/DC Converter output options mnemonics:

+2VDC 50W (+2V-50W), -2VDC 50W (-2V-50W), +3.3VDC 75W (+3.3V-75W), -3.3VDC 75W (-3.3V-75W), +5VDC 100W (+5V-100W), -5VDC 100W (-5V-100W), +12VDC 100W (+12V-100W), -12VDC 100W (-12V-100W), +15VDC 100W (+15V-100W), -15VDC 100W (-15V-100W), +28VDC 100W (+28V-100W), -28VDC 100W (-28V-100W), +48VDC 100W (+48V-100W), -48VDC 100W (-48V-100W).

/R: Redundant PSU

1 Slot plug-in Optional RPSUs available for ATR-25/35/SIXHEX:

• R475W: 28 VDC input only.
  • Output: + 5 VDC @ 40A, +/-12VDC @ 8A, +3.3VDC @ 22A.
• R575W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 40A, +/-12VDC @ 12A, 3.3VDC @ 22A.
• R450W: 28 VDC input only.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 8A, +3.3VDC @ 45A.
• R550W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 12A, 3.3VDC @ 45A.

/T: Temperature Supervisory Unit

• TSU: Temperature Supervisory Unit in RPSU module.

NOTE: Applicable to all SixHex Chassis - Fitted as standard (fill field with T or leave blank, no specification required).

./S: Chassis Supervisory Unit

• CSU: Optional Microcontroller Chassis Supervisory Unit.

/FP: Front Panel Layout

• CMP: CM Computer front panel fitted with MIL-C-38999 connectors.
• UDP: User defined front panel layout (requires customer drawings).

/TC: Chassis Top Cover

• STC: Standard Heat Exchange Top Cover (20mm clearance).
• HTC: Extended Heat Exchange High-Profile Top Cover (15mm extra clearance).

/BC: Chassis Bottom Cover

• SBC: Standard Low-Profile Bottom Cover. Vertical wiring clearance below backplane: 50mm.
• HBC: High-Profile Bottom Cover. Vertical wiring clearance below backplane: 65mm.

/F: Rear-mounted Fan Pack Assembly

Rotron Fans available for CM-ATR-25/SIXHEX & CM-ATR-35/SIXHEX

• F115-400: 2x PX3 Military fan 115VAC @ 400 Hz (100CFM each).
• F200-400: 2x PX3 Military fan 200VAC @ 400 Hz 3-Ph (140CFM each).
• F28: 2x PX3 Military fan 28VDC (110 CFM each).
• F115-60: 2x PX3 Rugged for 115VAC @ 60 Hz (100 CFM each).
• F220-50: 2x PX3 Rugged for 220VAC @ 50 Hz (100 CFM each).

Rotron Fans available for CM-ATR-45/SIXHEX

• F115-400: 4x PX3 Military fan 115VAC @ 400 Hz (100CFM each).
• F200-400: 4x PX3 Military fan 200VAC @ 400 Hz 3-Ph (140CFM each).
• F28: 2x PX3 Military fan 28VDC (110 CFM each).
• F115-60: 4x PX3 Rugged for 115VAC @ 60 Hz (100 CFM each).
• F220-50: 4x PX3 Rugged for 220VAC @ 50 Hz (100 CFM each).

/F: Rear-mounted Vehicle air-plenum

• VAP: Vehicle air-plenum according to customer specifications (external forced air-source).

/G: Fan Finger Guards

• STDG: Standard Rotron PX3 finger guards.
• EMIG: Optional EMI Shielding finger guards fitted with honeycomb filter.

/C: Chassis Colour
B: Black G: Navy Gray E: Army Dark Earth W: White R: Red PT: Platinum	YW: Yellow GN: Green BLU: Dark Blue CR: Chromate MIL-5541 O: Other (user defined)

NOTE: "Airflow Arrows" painted to complement chosen chassis colour - For changes, Application upon request.

/S5: Enclosure Size

• CM-ATR-25: 1/2 ATR Long size. 5 slots 6U.
• CM-ATR-35: 3/4 ATR Long size. 7 slots 6U.
• CM-ATR-45: 1 ATR Long size. 12 slots 6U

/B: Backplane Type

• VME64x: Military VME Backplane.
• VME64xK: Military VME Backplane. Key-slot J0.
• cPCI: Military cPCI Backplane.
• VPX: VITA 46 Military VPX Backplane.

/I: PSU Input Voltage

• 28VDC: 28VDC Input.  
• 48VDC: 48VDC Input.  
• 270VDC: 270VDC Input.
• 90-264VAC: Autorange 90-264VAC @ 47-880Hz Input
• 200VAC-3Ph: 200VAC 3 Phase @ 47-880 Hz Input.

/W: Power Supply Watts

a. PSUs available for CM-ATR-25/SIXHEX:

• 475W: 28 VDC input only.
  • Output: + 5 VDC @ 40A, +/-12VDC @ 8A, +3.3VDC @ 22A.
• 575W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 40A, +/-12VDC @ 12A, 3.3VDC @ 22A.
• 450W: 28 VDC input only.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 8A, +3.3VDC @ 45A.
• 550W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 12A, 3.3VDC @ 45A.

b. PSUs available for CM-ATR-35/SIXHEX:

• 675W: 28 VDC input only.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 8A, +3.3VDC @ 22A.
• 775W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 12A, 3.3VDC @ 22A.
• 565W: 28 VDC input only.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 8A, +3.3VDC @ 80A.
• 665W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 20A, +/-12VDC @ 12A, +3.3VDC @ 80A.

c. PSUs available for CM-ATR-45/SIXHEX:   

• 950W: 28 VDC input only.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 12A, +3.3VDC @ 45A.
• 1050W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 20A, 3.3VDC @ 45A.
• 1065W: 28 VDC input only.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 12A, +3.3VDC @ 80A.
• 1165W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 20A, 3.3VDC @ 80A.
• 1225W: 28 VDC input only.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 12A, +3.3VDC @ 160A.
• 1425W: All PSUs except 28 VDC input.
  • Output: + 5 VDC @ 80A, +/-12VDC @ 20A, 3.3VDC @ 160A.
• 1350W: 28 VDC input only.
• Output: + 5 VDC @ 160A, +/-12VDC @ 12A, +3.3VDC @ 80A.
• 1550W: All PSUs except 28 VDC input.
• Output: + 5 VDC @ 160A, +/-12VDC @ 20A, 3.3VDC @ 80A.
• 2x 650W: 28 VDC input only.
• Output 1: + 5 VDC @ 40A, +/-12VDC @ 8A, +3.3VDC @ 45A +28VDC @ 7A.
• Output 2: + 5 VDC @ 40A, +/-12VDC @ 8A, +3.3VDC @ 45A +28VDC @ 7A.
• 2x 750W: All PSUs except 28 VDC input.
• Output 1: + 5 VDC @ 40A, +/-12VDC @ 12A, +3.3VDC @ 45A +28VDC @ 7A.
• Output 2: + 5 VDC @ 40A, +/-12VDC @ 12A, +3.3VDC @ 45A +28VDC @ 7A.

/D1: Backplane DC/DC AUX1

• Optional user defined auxiliary output DC/DC Converter on Backplane according to DC/DC mnemonics.

/D2: DC/DC AUX2 (Only CM-ATR-35/SIXHEX & CM-ATR-45/SIXHEX)

• Optional user defined auxiliary output DC/DC Converter on Backplane according to DC/DC mnemonics.