![]() |
|||
|
|
|
||
MIL-STD Products CM Computer
products are delivered already tested,
qualified and certified per Military Standards in order
to guarantee immediate fault free operation in the most severe
Military and Aerospace environments. Offering a crucial
& complete testing program differentiates us from our
competitors, eliminates our customers’ program risk and
demonstrates the ultimate quality of our ATR products.
CETECOM/ATR4Wireless Labs, an independent European laboratory fully capable of performing MIL-STD testing procedures conducted our comprehensive qualification program in conformance with Military Standard guidelines. Certificates and associated Testing Reports are delivered to our ATR customers. |
|||
![]() |
|||
Certificate MIL-STD-461E
|
|||
![]() |
|||
Certificate MIL-STD-810F Available The CM-ATR-25/35/45
chassis environmental testing was performed without using shock
absorbers during the Sock & Vibration procedures. Operational testing
also surpassed MIL-STD-810F temperature limits. The wide range of
Certificates achieved qualify our products for practically all types of
military applications irrespective of the installation platform
(Avionics, Ground vehicles, Naval Systems, etc.). Certificates available
cover the following MIL-STD-810F testing procedures.Method 501.4 Method 501.4 Procedure II. High Temperature Operation (+80 ºC). Method 502.4 Method 502.4 Procedure II. Low Temperature Operation (-55 ºC). Method 507.4 Humidity (5 cycles of 48 h). Method 516.5 Procedure 1. Shock (Sawtooth 20g, 11ms, 3 axis, 2 polarity, 18 shocks). Method 509.4. Salt fog. 96 hours total, 5% NaCI pH 6.3. |
|||
| Certificate - Photo Testing Gallery (click on photos below) | |||
![]() ![]() ![]() |
|||
![]() |
|||
|
About Us
|
|||
| ©2008 Copyright by CM Computer All Rights Reserved | |||