ORDERING INFORMATION

This section shows all the CM-DIO-40 standard
configurations and options.

CM-DIO-40 /I /O /T /M

• I (Board Input Version)
  • 1: Input voltage range specified by the customer.
  • 2: Input voltage range 0-5 VDC.
  • 3: Input voltage range 0-12 VDC.
  • 4: Input voltage range 0-28 VDC.
  • 5: Input voltage range 0-48 VDC.
  • 6: Input voltage range 0-115 VAC RMS @ 60 Hz sine.
  • 7: Input voltage range 0-220 VAC RMS @ 50 Hz sine.
  • 8: Input voltage range 0-26 VAC RMS @ 400 Hz sine.
  • 9: Input voltage range 0-32 VAC RMS @ 60 Hz sine.
  
  
• O (Board Output Version) ("*" available with Direct or Inverted output configuration).
  • 1: 32 Relays with 32 SPDT or 32 SPST contacts.
  • 2: 32 Optocouplers with 50 VDC @ 100 mA open-collector phototransistors.
  • 3: 32 Photo-MOSFETs up to 400 Volts AC/DC @ 150 mA.
  • 4: 32 Solid State Relays (SSR) from 10 to 280 VAC @ 1 Amp.
  • 5: 32 Open-Drain power MOSFETs up to 400 VDC @ 1 Amp.
  • 6: 32 Triacs up to 400 VAC @ 1 Amp.
  • 7: 32 Thyristor (SCR) up to 400 VAC @ 1 Amp.
  • 8: 32 Totem-pole FAST TTL outputs (*).
  • 9: 32 Open-Collector TTL gates up to 30 VDC @ 50 mA (*).
  • 10: 32 Open-Collector TTL gates with on-board 1K pull-up resistors to +5 VDC (*).
  • 11: 32 Open-Collector TTL gates with on-board 2K pull-up resistors to +12 VDC (*).
  
  
• T (Board Temperature Range)
  • I: Industrial range. Only available with fiberglass PCB.
  • R+: Military Rugged+ range. Only available with conduction cooled PCB.
  • 883: Military 883 range. Only available with conduction cooled PCB.
  
  
• M (PCB Mechanical Version)
  • A: IEC-297 Standard mechanics with front panel I/O connectors.
  • B: P1101.2 Military mechanics with dummy front panel & wedge-locks.
  
  

BOARD RANGE

• INDUSTRIAL (I):
  • Manufactured with Industrial range plastic or ceramic IC's rated for -40 (-25) to +85 ºC. Continuous module operation from -20 to +75 ºC. Class II industrial quality connectors.

• MILITARY-RUGGED (R+):
  • Implements ceramic IC's rated from -55 to +125 ºC. Class I MIL-C-55302 connectors. Conduction cooled PCB with thermal overlay. Board operation from -40 to +85 ºC. Storage from -55 to +125 ºC.

• MILITARY-STD-883 (883):
  • Manufactured with conduction cooled PCB and MIL-STD-883 B/C military ceramic parts (-55 to +125 ºC ). Class I MIL-C-55302 connectors. Continuous board operation range from -50 to +90 ºC. Storage from -55 to +125 ºC.