ORDERING INFORMATION

This section shows all the CM-DA-50 standard configurations and options.

CM-DA-50 /V /T /M

• V (Board Version)
  • 1: 24 D/A channels, 14 bit, full Built-In-Test, without galvanic isolation.
  • 2: 24 D/A channels, 14 bit, full Built-In-Test, galvanic isolation > 800 Volts..
  
  
• T (Board Temperature Range)
  • C: Commercial range. Only available with fiberglass PCB.
  • I: Industrial range. Only available with fiberglass PCB.
  • R+: Military Rugged+ range. Only available with conduction cooled PCB.
  • 883: Military 883 range. Only available with conduction cooled PCB.
  
  
• M (PCB Mechanical Version)
  • A: IEC-297 Standard mechanics with front panel I/O connectors.
  • B: P1101.2 Military mechanics with dummy front panel & wedge-locks.
  
  

BOARD RANGE

• COMMERCIAL (C):
  • Implements low cost Commercial plastic IC's rated for 0 to +70 ºC. Continuous board operation from 0 to +60 ºC. Class II industrial quality connectors.

• INDUSTRIAL (I):
  • Manufactured with Industrial range plastic or ceramic IC's rated for -40 (-25) to +85 ºC. Continuous module operation from -20 to +75 ºC. Class II industrial quality connectors.

• MILITARY-RUGGED (R+):
  • Implements ceramic IC's rated from -55 to +125 ºC. Class I MIL-C-55302 connectors. Conduction cooled PCB with thermal overlay. Board operation from -40 to +85 ºC. Storage from -55 to +125 ºC.

• MILITARY-STD-883 (883):
  • Manufactured with conduction cooled PCB and MIL-STD-883 B/C military ceramic parts (-55 to +125 ºC ). Class I MIL-C-55302 connectors. Continuous board operation range from -50 to +90 ºC. Storage from -55 to +125 ºC.