vme chassisTECHNICAL SPECIFICATIONS
D/A converter: 12 bit multiplying AD-7545. On-chip 12 bit data latch.
Channel accuracy: < 0.05 % typ. (2 mV in 0-5 VDC).
Accuracy derating: Better than 5 ppm/ºC in all ranges.
Output impedance: 0.1 Ohm for output loads < 5 mA.
Output protection: All channel current is limited to 20 mA against output short circuits.
Galvanic isolation (only on CM-DA-40/2): Full galvanic isolation > 1000 V on all analog I/O signals with respect the VMEbus power & TTL lines.
DC standard ranges: 0-5, 0-10, ±5 or ±10 VDC using the on-board voltage reference.
External references: One common external voltage reference is applied to all channels. Jumper selectable individual external voltage reference per channel.
External reference range: References can be any AC/DC voltage in the range of ±10 Volts.
External reference input protection: Protection up to ±25 Volts on all external input references.
Power consumption:
CM-DA-40/1 (3 W).- +5VDC @ 150 mA, +12VDC @ 150 mA, -12VDC @ 50 mA. air transport rack
CM-DA-40/2 (4 W).-+5VDC @ 800 mA.
Weight:
Military R+ & 883.- 670 grams.
Commercial & Industrial.- 470 grams.
Mechanical size: Single slot 6U (233.4x160 mm).
Mechanical format:
CM-DA-40/A: Classic IEC-297 mechanics for 19" racks with I/O on front panel.
CM-DA-40/B: Military IEEE P1101 wedgelocks mechanics for ATR enclosures.
Humidity: Up to 95% RH non-condensing.
Altitude: Sea level up to 15 Km (50,000 ft.).
VMEbus interface: A24/D16 Standard slave interface.
VMEbus addressing: Two jumper blocks provide 256 mapping options in the A24 range.


military backplanes MILITARY DESIGN

q -55 to +125 ºC ceramic military ICs. q MIL-STD-810 D Temperature
q MIL-C-24308 & MIL-C-55302 Class I (Methods 501.2 & 502.2).
Connectors. q MIL-STD-810 D Shock and Vibrations
q Thin film 0.1% precision Resistors. (Methods 514 & 516).
q No PCB tracks in external layers. q MIL-STD-810 D Saline Fog and Dust
q MIL-E-5400 for avionics equipment class 1B (Methods 507 & 509).
(Temperature and Altitude). q Military Class V Printed Circuit Board.


CM Logo MILITARY & INDUSTRIAL VERSIONS


CM-DA-40/I/ACM-DA-40/R+/ACM-DA-40/883/B



Click here
to get this data sheet as an Adobe Acrobat (4.0) PDF file!

Home Page | CM-DA-40 Main Page| Description
Software Support | Ordering Information